深蓝快车 www.chinama.com.cn 中文网站 www.chinama.com.cn 英文网站
(ibm、hp、sun、oracle)小型机、服务器、存储专业技术服务

Feature Codes for the TS4500 tape library 深度专业技术服务

产品

技术

配件

IT疑难问题解决方案1

IT疑难问题解决方案2

小型机服务

服务器服务

存储服务

维保

机房搬迁

操作系统|双机

数据库

备份/恢复

Oracle灾备

应急服务

楼宇监控

深蓝快车

技术中心

案例

联系我们

ibm DS8000 FRU PN all
ibm DS8100 DS8300 DS8700 DS8880 DS8870 FRU PN all
ibm DS8100 Models 921 931 FRU PN 01
ibm DS8300 Models 922 932 9A2 and 9B2 FRU PN 01
ibm DS8700 Models 941 and 94E FRU PN 01
ibm DS8870 Models 961 and 96E FRU PN 01
ibm DS8880 Models 951 and 95E FRU PN 01
IBM DS8000 Management console error codes 0xxx Exxx Hxxx
IBM DS8000 System reference codes
联系电话:
Moble: 13301272832 (微信同号)
Tel: 　010-82666745
联系人： 　 霍经理
QQ: 　　619804118
E-mail: 　　bjslkc@163.com
公司：北京深蓝融鑫科技发展有限公司

IBM TS45000 Tappe Library Error Code -->联系-->霍工-->13301272832(微信同号)


Feature Codes for the TS4500 tape library -->联系-->霍工-->13301272832(微信同号)

Table 1. FCs for the frame models of the TS4500 tape library
FC Model CSU Description
0983 Lx5, Dx5, 60F, 60S, TR1, TR2 No TAA compliance
1404 L25, L55 No TS1140 and TS1150 tape drive support

This triggers the shipment of a JK diagnostic cartridge. When model L25 is ordered or when FC 9080 (Mixed Media) is ordered for model L55, a minimum of one of FC 1404 or 1406 is required but any may be selected.
1405 L25, L55 No LTO5 and LTO6 tape drive support

This triggers the shipment of an L5 diagnostic cartridge. When model L55 is ordered, a minimum of one of FC 1405 or 1407 is required but both can be selected. When FC 9080 (Mixed Media) is ordered for model L25, a minimum of one of FC 1405 or 1407 is required but both can be selected.
1406 L25, L55 Both TS1150, TS1155, or TS1160 tape drive support

This feature provides a JL diagnostic cartridge. When model L25 is ordered or when FC 9080 (Mixed Media) is ordered for model L55, a minimum of one of FC 1404 or 1406 is required but any may be selected.
1407 L25, L55 No LTO6 and LTO7 tape drive support

This triggers the shipment of an L6 CE cartridge. When model L55 is ordered, a minimum of one of FC 1405 or 1407 is required but both can be selected. When FC 9080 (Mixed Media) is ordered for model L25, a minimum of one of FC 1405 or 1407 is required but both can be selected.
1408 L25, L55 No LTO7 and LTO8 tape drive support

This triggers the shipment of an L7 CE cartridge. When model L55 is ordered, a minimum of one of FC 1407 or 1408 is required but both can be selected. When FC 9080 (Mixed Media) is ordered for model L25, a minimum of one of FC 1407 or 1408 is required but both can be selected.
1412 L25, L55 No SAS tape drive support

This feature provides a mini SAS HD wrap tool. Only one tool is required for the library. The wrap tool is used to isolate drive sled problems
1442 HA Kit w/Second Accessor No Dual Accessors
This triggers the shipment of

Four CE/diagnostic cartridges (two of latest generation for both LTO and 3592)
Service Bay Stop-A and Service Bay Stop-B related parts
TS4500 Accessor B including scanner, enhanced grippers, and enhanced node cards

There is a maximum of one HA kit (FC 1442) per library.
1450 D25, D55 No TS4500 frame control assembly (FCA)

-->联系-->霍工-->13301272832(微信同号)
Includes 1x LCC and 2x power supplies.
1460 L25, L55 No Redundant Accessor Power/Network

This provides power and internal network redundancy for the L25/L55 frame. This is a prerequisite to FC 9002.
1530 D25, D55, L25, L55, S25, S55 No Web camera mounting hardware

Provides mounting hardware only.
1531 D25, D55, L25, L55 No First quad drive mounting kit
This feature provides signal and power cabling for a column of 4 adjacent drives. Fiber cables can be ordered via one of the following:

FC 1536, MMF Quad Drive-to-Patch Panel cables
FC 1537, SMF Quad Drive-to-Patch Panel cables
FC 9713, No Patch Panel Cables

Prerequisite:

Models L25/D25: One FC 1536 or 9713 is required
Models L55/D55: One FC 1536 or 1537 or 9713 is required.
Models D25/D55: FC 1450 is required.

1532 D25, D55, L25, L55 No Second quad drive mounting kit

This feature provides signal and power cabling for a column of 4 adjacent drives. Fiber cables can be ordered via one of the following:

FC 1536, MMF Quad Drive-to-Patch Panel cables
FC 1537, SMF Quad Drive-to-Patch Panel cables
FC 9713, No Patch Panel Cables

This feature is not supported in the leftmost frame of a dual accessor library.
Prerequisite:

Models L25/D25: One FC 1536 or 9713 is required.
Models L55/D55: One FC 1536 or 1537 or 9713 is required.
FC 1521 or 1531 is required.

1533 D25, D55, L25, L55 No Third quad drive mounting kit

This feature provides signal and power cabling for a column of 4 adjacent drives. Fiber cables can be ordered via one of the following:

FC 1536, MMF Quad Drive-to-Patch Panel cables
FC 1537, SMF Quad Drive-to-Patch Panel cables
FC 9713, No Patch Panel Cables

This feature is not supported in the leftmost or rightmost frame of a dual accessor library.
Prerequisite:

Models L25/D25: One FC 1536 or 9713 is required.
Models L55/D55: One FC 1536 or 1537 or 9713 is required.
FC 1522 or 1532 is required.

1534 D25, D55, L25, L55

Both
Fourth quad drive mounting kit

This feature provides signal and power cabling for a column of 4 adjacent drives. Fiber cables can be ordered via one of the following:

-->联系-->霍工-->13301272832(微信同号)
FC 1536, MMF Quad Drive-to-Patch Panel cables
FC 1537, SMF Quad Drive-to-Patch Panel cables
FC 9713, No Patch Panel Cables

This feature is not supported in the leftmost frame of a single accessor library.

This feature is not supported in the leftmost or rightmost frame of a dual accessor library.
Prerequisite:

Models L25/D25: One FC 1536 or 9713 is required.
Models L55/D55: One FC 1536 or 1537 or 9713 is required.
FC 1523 or 1533 is required.

1536 D25, D55, L25, L55 Both MMF Quad Drive-to-Patch Panel Cables (all drive models)

This feature includes all fiber cables required for a column of 4 drives, 8x LC-LC Multimode Fiber (MMF) Drive-to-Patch Panel cables.

Prerequisite: One FC 1536 or 1537 or 9713 per each FC 1531, 1532, 1533, and 1534.
1537 D55, L55 Both SMF Quad Drive-to-Patch Panel Cables (LTO8)

This feature includes all fiber cables required for a column of 4 drives, 8x LC-LC Single Mode Fiber (SMF) Drive-to-Patch Panel cables.

Prerequisite: One FC 1536 or 1537 or 9713 per each FC 1531, 1532, 1533, and 1534.
1604 L25, L55 Yes Transparent LTO encryption

Provides license keys to enable transparent LTO encryption.
1628 L55 Yes Additional LTO Cartridge Magazines

Provides magazine and cover for transport or storage of up to 18 cartridges.
1629 L25 Yes Additional 3592 Cartridge Magazine

Provides magazine and cover for transport or storage of up to 16 cartridges.
1643 L25, L55 Yes Intermediate capacity on demand

Provides license key to increase storage from entry capacity to intermediate capacity.
1644 L25, L55 Yes Base capacity on demand

Provides license key to increase storage from intermediate capacity to base capacity.

This feature code is a prerequisite for FC 9002 or Model Lx5 HD CoD FC 164x.

Prerequisite: FC 1643
1645 S25 Yes High density capacity on demand
1646 S55 Yes High density capacity on demand
1647 L25 Yes High density capacity on demand

Prerequisite: FC 1644
1648 L55 Yes High density capacity on demand

-->联系-->霍工-->13301272832(微信同号)
Prerequisite: FC 1644
1649 D25 Yes High density capacity on demand
1650 D55 Yes High density capacity on demand
1652 D25, D55 No Two additional I/O stations

This feature code adds either 36 (LTO) or 32 (3592) I/O slots.
1663 D25, D55, L25, L55 No Drive removal
1682 L25, L55 Yes Path failover
1742 Sx4 No TS4500 Control - Upgrade

This includes 1x top panel and 2x Ethernet cables, card cages, ASCs, BPCs, and LFIs.
1750 TR1, TR2 No Side covers

This feature provides left-and right-side end covers. This feature is required only for the first top rack ordered (if multiple top racks are installed on adjacent frames).
1751 TR1 No Power distribution unit
Provides one PDU to be mounted in the top rack. The first PDU in a top rack does not consume any of the 10U of rack space. The second PDU in a top rack consumes 1U of rack space.
Note

A maximum of two FC 1751s can be ordered.
FC 1751 cannot be installed in the same rack as an FC 1752 PDU.

Each PDU has 10 C13 outlets divided into 2 groups of 5 outlets. Each group is protected by a 15 amp circuit breaker. In addition, there is a master 25 amp circuit breaker for the entire PDU. All of the circuit breakers are rated at 5 kAIC. Each PDU has a control input that can be used to turn all of the outlets on or off by an external switch or relay contact (not provided). The control input is defaulted to ON by a jumper plug included with the PDU.

Prerequisite: For each FC 1751 ordered, one power cord (FC 9954 through 9959 or 9966) must also be ordered.

Limitation: Mutually exclusive with 1752
1752 TR1, TR2 Yes Enhanced PDU

Provides one PDU with 3-phase (wye) or single phase input power, to be mounted in top rack (max of two may be ordered). Each PDU ordered in a top rack consumes 1U of rack space.

Each PDU has 9 outlets divided into three groups. Within each group there are two C-13 outlets and one C-19 outlet. Each group is protected by 20amp circuit breakers rated at 10 kAIC. Note that, if required, loads installed in the TR1 with C14 inlets can be connected to the PDU C19 outlets by use of C20 to C13 power cord FC 9949.

Prerequisite:

For single phase input power, for each PDU ordered must order one power cord FC 9954 through 9958.
For 3-phase (wye) input power, for each PDU ordered must order one power cord FC 9948.

Limitation: Mutually exclusive with FC 1751
1753 TR2 No Olympus Rack Configuration

This feature code specifies the configuration of the TR2 rack to be in conformance with the Open Compute Project Olympus Rack Specification.

This provides 5U of 19 inch rack space with 3 sets of EIA rails with a spacing from the front face of the front EIA rail to the rear face of the middle EIA rail being 745 mm and the spacing from the front face of the front EIA rail to the rear face of the rear EIA rail to be 1020 mm.

It includes a top cover that allows top access cables to be routed into the TR2. This also includes side air blocks that prevent airflow between the EIA rails and the side covers per the Open Compute Olympus Rack Specification
1754 TR2 No Standard 19 inch Rack Configuration

This feature code specifies the configuration of the TR2 rack to be in conformance with industry standard 19 inch racks.

This provides 5U of 19 inch rack space with 2 sets of EIA rails with a spacing from the front face of the front EIA rail to the rear face of the rear EIA rail being 719 mm.

It includes a top cover that allows top access cables to be routed into the TR2.
1755 TR2 Yes Front Door

This feature provides the front door for the TR2
1756 TR2 Yes Rear Door

This feature provides the rear door for the TR2
1802 L25, L55 No 1- to 2-frame X-track cable

Non-HA 1 to 2 Frame Track Cable
1806 L25, L55 No 3- to 6-frame X-track cable

Non-HA 3 to 6 Frame Track Cable
1814 L25, L55 No 7- to 14-frame X- track cable

Non-HA 7 to 14 Frame Track Cable. See 3584 X Track Cable Features/Specify codes for more details.

Limitation: Not supported with FC 2071 or FC 9071.
1818 L25, L55 No 9- to 18-frame X- track cable

Non-HA 9 to 18 Frame Track Cable. See 3584 X Track Cable Features/Specify codes for more details.

Limitation: Not supported with FC 2071 or FC 9071.
1909 L25, L55, D25, D55 No Single power source bifurcated cable

Allows attachment of a powered frame to a single outlet while also maintaining drive redundant power.
1951 D25, D55, L25, L55, S25, S55 No Power distribution units

-->联系-->霍工-->13301272832(微信同号)
Provides two PCAs, mounting hardware including rack brackets, and internal power cables.

Supports any combination of up to 3 pairs of power cords for FC 4875 on the same frame and FC 9989 on adjacent frames.

-->联系-->霍工-->13301272832(微信同号)
Each PDU has 10 C13 outlets divided into 2 groups of 5 outlets. Each group is protected by a 15 amp circuit breaker. In addition, there is a master 25 amp circuit breaker for the entire PDU. All of the circuit breakers are rated at 5 kAIC. Each PDU has a control input that can be used to turn all of the outlets on or off by an external switch or relay contact (not provided). The control input is defaulted to ON by a jumper plug included with the PDU.

Corequisite: One power cord feature (FC 9954 through 9959 or 9966)

Limitation: FC 1951 cannot be installed in the same rack as an FC 1952 PDU.
1952 D25, D55, L25, L55, S25, S55 No Enhanced PDUs

Provides two PDUs with 3-phase (wye) or single phase input power, mounting hardware including rack brackets, and internal power cables to provide power to the local frame control assembly.

These line cord features may require different customer facility outlets than frames without FC 1952. Can be used for adjacent frame AC power cord aggregation, or for unique facility AC socket requirements. Supports any combination of up to 3 pairs of power cords for FC 9989 on adjacent frames.

Each PDU has 9 outlets divided into three groups. Within each group there are two C-13 outlets and one C-19 outlet. Each group is protected by 20amp circuit breakers rated at 10 kAIC. Note that, if required, loads installed in the TR1 with C14 inlets can be connected to the PDU C19 outlets by use of C20 to C13 power cord FC 9949.

Prerequisite:

For single phase input power, must order one power cord FC 9954 through 9958.
For 3-phase (wye) input power, must order one power cord FC 9948.

Limitation:

Mutually exclusive with legacy PDU FC 1951, Fibre Channel switch mounting FC 4879, and Ethernet switch FC 2704.
Mutually exclusive with FC 4879 or 2704.

2002 L25, L55 No 1-2 Frame Flex Track A Cable
2006 L25, L55 No 3-6 Frame Flex Track A Cable
2014 L25, L55 No 7-14 Frame Flex Track A Cable
2018 L25, L55 No 9-18 Frame Flex Track A Cable
2071 L25, L55 No Flex Track Guide

This includes AXY, AXY plate, ASC to Flex track cable, and new end stops.
2072 D25, D55, S25, S55, Sx4 No Flex Track Guide for Expansion Frame
2309 xx5 No TS4500 Accessor Refresh

Provides a complete accessor assembly with HD grippers to Lxx models or models with FC 1442.

Prerequisite: FC 2071, 2072, or 9071, 9072.
2402 L25, L55 No 1-2 Frame Flex Track B Cable
2406 L25, L55 No 3-6 Frame Flex Track B Cable
2414 L25, L55 No 7-14 Frame Flex Track B Cable
2418 L25, L55 No 9-18 Frame Flex Track B Cable
2704 L25, L55 No Console expansion 26-port Ethernet switch/rack mount

Provides a 26-port Ethernet switch and attachment cable for connection to an IMC as a centralized system console.

Up to 24 extra connections of FC 2715 are provided by this feature. This feature is supported on Lx5 models to allow other products to share the IMC.
2715 L25, L55 No TSSC attachment cable

FC 2715 is a cable to attach a unit to the Ethernet switch provided by the TSSC.
Note A maximum of 43 of FC 2715 can be included in a single TSSC facility.
Note FC 2704 is supported on Lx5 models if you are connecting the frame to an existing TSSC.
2735 L25, L55 No USB Optical Drive

Required for all new plant orders. Provides a USB optical drive for use with the Integrated Management Console (IMC). The optical drive is required for IMC code and updates to the service Knowledge Center.
2737 S25, S55 No IMC Separate Power Source

This feature allows longer distances between the IMC end panel and an FCA by supplying 2 Ethernet cables that are longer than normal. For both plant and field, instructions are also provided for moving the IMC PDU from another frame into this frame.

Prerequisite: One of the FC 9970-9985, 9989 power cords.
4879 L25, D25, TR1, TR2 No TS7700 BE Switch Mounting Hardware

Provides 2x Fibre channel switch mounting hardware, including rack brackets and power cords.

Prerequisite: FC 4880
4880 L25, D25, TR1, TR2 No TS7700 BE 16 Gb Switch

Provides 1x Fibre channel switch (16 Gb).

Limitation: There is a maximum of 2x FC 4880 per model x25.
4890 L25 Preloaded Media Enablement Kit

This feature provides the brackets and accessories for a system integrator to pre-load media.

Prerequisite: FC 9074
4892 D25, D55, L25, L55, S25, S55 No Rear Door Sensor

This feature provides rear door sensor components for notifying of rear door open/close events.

Prerequisite: FC 9074
6013 D25, D55, L25, L55 Yes LC to LC Fibre Channel cable - 13m (43 ft)
6025 D25, D55, L25, L55 Yes LC to LC Fibre Channel Cable - 25m (82 ft)
6061 D25, D55, L25, L55 Yes LC to LC Fibre Channel Cable - 61m (200 ft)
8750 D55, L55 No LTO cleaning cartridge

Universal cleaning cartridge.
8802 D25, L25 No 3592 cleaning cartridge
9001 D25, D55, L25, L55 No Driveless frame
9002 L25, L55 No First expansion frame attachment

Used as a part of the process to add any Dxx or Sxx frame.
Prerequisites:

-->联系-->霍工-->13301272832(微信同号)
FC 1460 and 1644.
FC 9001 for Lxx models.

9003 L25, L55 No Additional expansion frame attachment

Used as a part of the process to add any Dxx or Sxx frame.
9040 High Availability Library Lx5

Prerequisites: One Flex-track A and B cable of the same length.

Flex-Track A cable: FC 2002, 2006, 2014, or 2018.

Flex-Track B Cable: FC 2402, 2406, 2414, or 2418.
9071 L25, L55 No Flex Track Guide Base

Includes AXY, AXY plate, ASC to Flex track cable, and new end stops.
9072 D25, D55, S25, S55, Sx4 No Flex Track Guide for Expansion Frame
9073 D25, D55, L25, L55, S25, S55 No Gen-2 Frame

This feature indicates that the frame is capable of supporting Enhanced PDUs and their associated power cords. FC 9073 is a prerequisite for ordering FC 1952.
9074 D25, D55, L25, L55, S25, S55 No Gen-3 Frame

This feature indicates the frame includes third generation modifications to support future enhancements.
9080 L25, L55 No Mixed Media Library

Prerequisite: Library must contain a mix of LTO and 3592 frames.

For model L25, FC 1628 (LTO Magazine) and a minimum of one of FC 1405 or 1407 (LTO CE cartridge).
For model L55, FC 1629 (3592 Magazine) and FC 1404 (3592 CE cartridge).

Limitation: Mixed media not supported for Lx2/Lx3.
9210 L25, L55 No Attached to HP-UX system
9211 L25, L55 No Attached to Solaris system
9212 L25, L55 No Attached to Windows system
9213 L25, L55 No Attached to other non-IBM system
9215 L25, L55 No Attached to Linux® system
9217 L25, L55 No Attached to LM/TS7700
9218 L25, L55 No Attached to HPSS
9400 L25, L55 No Attached to i5/OS or OS/400 system
9600 L25, L55 No Attached to AIX system
9607 D55, L55 No 3588 F7A/F7C tape drive - plant install

This feature informs the plant to install one LTO 7 Tape Drive Model F7A/ F7C (3588 Model F7A or F7C) into a Tape Library Model D55, or L55 coming from the plant.
Prerequisites:

L55/D55 Models – FC 1521 or 1531 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than zero.
L55/D55 Models – FC 1522 or 1532 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than four.
L55/D55 Models – FC 1523 or 1533 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than eight.
L55/D55 Models – FC 1524 or 1534 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than twelve.

9609 D55, L55 No 3588 F8A/F8C tape drive - plant install

This feature informs the plant to install one LTO 8 Tape Drive Model F8A/F8C (3588 Model F8A or F8C) into a Tape Library Model D55, or L55 coming from the plant.

Installation of a 3588 Tape Drive canister requires that a Quad Drive Mounting Kit feature (FC 1521, 1522, 1523, 1524 or 1531, 1532, 1533, 1534) be installed in the TS4500 frame to contain the canister.
Prerequisite:

L55/D55 Models – FC 1521 or 1531 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than zero.
L55/D55 Models – FC 1522 or 1532 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than four.
L55/D55 Models – FC 1523 or 1533 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than eight.
L55/D55 Models – FC 1524 or 1534 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than twelve.

Note One FC 1408 is required per Tape Library if this is the first LTO 8 (3588 Model F8A, F8C, or F8S) tape drive ordered.
9611 D55, L55 No 3588 F8S tape drive - plant install

This feature informs the plant to install one LTO 8 Tape Drive Model F8S (3588 Model F8S) into a Tape Library Model D55 or L55 coming from the plant.
Prerequisite:

L55/D55 Models – FC 1521 or 1531 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than zero.
L55/D55 Models – FC 1522 or 1532 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than four.
L55/D55 Models – FC 1523 or 1533 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than eight.
L55/D55 Models – FC 1524 or 1534 when tape drive FCs 9690, 9695, 9697, 9607, 9609, 9611 are greater than twelve.

-->联系-->霍工-->13301272832(微信同号)
Note One FC 1408 is required per Tape Library if this is the first LTO 8 (3588 Model F8A, F8C, or F8S) tape drive ordered.
9677 D25, L25 No Plant Install 3592 in a 3584 Frame

This specify code notifies the plant to factory install a new 3592 Tape Drive into a new 3584 Tape Library Frame coming from the plant.

This code must appear on the tape drive order and also the Plant Install 3592 E05 in a 3584 feature (FC 9680) or Plant Install 3592 E06 in a 3584 feature (FC 9683) or Plant Install 3592 E07/EH7 in a 3584 feature (FC 9692) or Plant Install 3592 E08/EH8 in a 3584 feature (FC 9699) or Plant Install 3592 55E in a 3584 feature (FC 9704) or Plant Install 3592 55F/55G in a 3584 feature (FC 9705) or Plant Install 3592 60F in a 3584 feature (FC 9706) or Plant Install 3592 60E in a 3584 feature (FC 9707) or Plant Install 3592 60S in a 3584 feature (FC9708) must appear on the 3584 Frame order.
9689 D25, L25 Yes Field Install 3592 in a 3584 Frame

This feature notifies the plant to ship one 3592 Tape Drive, which will be field installed in a 3584 Tape Library Frame.

This code must appear on the tape drive order and also the Field Merge 3592 Tape Drive (FC 1674) or (FC 1675) or (FC 1676) for a 3592 E07/E08/55G/60G, (FC 9690) for a 3592 EH7/EH8/55E/55F or (FC 9726) for a 3592 60E/60F/60S must appear on the 3584 Tape Library Frame order.
9690 D25, D55, L25, L55 Both LTO, TS1140, TS115x - field install drive in 3584

This feature field installs one 3592 Model EH7 or EH8 or 55E or 55F, or one 3588 Model F5C or F6C or F7C or F8C or F8S Tape Drive into an installed 3584 Model D25 or L25, or D55 or L55. This feature is also required to field merge a 3592 Model EH7, EH8, 55E, 55F, or 3588 Model F5C, F6C, F7C, F8C, F8S Tape Drive into a 3584 frame coming from the plant. The Tape Drive requires a Quad Drive mounting kit to contain the drive.
Prerequisite:

FC 1521 or 1531 when tape drive FCs 9690, 9692, 9699, 9695, 9697, 9607, 9704, 9705, 9706, 9707,9708, 9726, 9611, 9609 are greater than zero.
FC 1522 or 1532 when tape drive FCs 9690, 9692, 9699, 9695, 9697, 9607, 9704, 9705, 9706, 9707, 9708, 9726, 9611, 9609 are greater than four.
FC 1523 or 1533 when tape drive FCs 9690, 9692, 9699, 9695, 9697, 9607, 9704, 9705, 9706, 9707, 9708, 9726, 9611, 9609 are greater than eight.
FC 1524 or 1534 when tape drive FCs 9690, 9692, 9699, 9695, 9697, 9607, 9704, 9705, 9706, 9707, 9708, 9726, 9611, 9609 are greater than twelve.

9692 L25, L55 No 3592 E07/EH7 tape drive - plant install in 3584

FC 9692 is a manufacturing routing code.

Prerequisite: FC 152x (drive mounting kit). Each FC 152x supports up to 4 of FC 969x.
9695 L25, L55 No 3588 F5A/F5C tape drive - plant install in 3584

FC 9695 is a manufacturing routing code.

Prerequisite: FC 152x/153x (drive mounting kit). Each FC 152x/153x supports up to 4 of FC 969x.
9697 D55, L55 No 3588 F6A/F6C tape drive - plant install

FC 9697 is a manufacturing routing code.

Prerequisite: FC 152x/153x (drive mounting kit). Each FC 152x/153x supports up to 4 of FC 969x.
9699 D25, L25 No 3592 E08/EH8 tape drive - plant install in 3584

FC 9699 is a manufacturing routing code.

Prerequisite: FC 152x (drive mounting kit). Each FC 152x supports up to 4 of FC 969x.
9700 D25, D55, L25, L55 No No host attach cables - from plant
9704 D25, L25 No 3592 55E tape drive - Plant Install in 3584
9705 D25, L25 No 3592 55F tape drive - Plant Install in 3584
9706 D25, L25 No 3592 60F tape drive - Plant Install in 3584

This feature tells the plant to install one 3592 Tape Drive Model 60F into a 3584 Model D25 or Model L25 coming from the plant.

Prerequisite: Installation of the 3592 Model 60F Tape Drive requires a Quad Drive mounting kit to contain the drive. Mounting Kit feature (FC 1515) or (FC 1535).
9707 D25, L25 No 3592 60E tape drive - Plant Install in 3584

This feature tells the plant to install one 3592 Tape Drive Model 60E into a 3584 Model D25 or Model L25 coming from the plant.
Prerequisite:

Installation of the 3592 Model 60E Tape Drive requires a Quad Drive mounting kit to contain the drive: FC 1531 or 1532 or 1533 or 1534
One FC 1406 is required per Tape Library if this is the first TS1160 60E tape drive ordered.

9708 D25, L25 No 3592 60S tape drive - Plant Install in 3584
This feature tells the plant to install one 3592 Tape Drive Model 60S into a 3584 Model D25 or Model L25 coming from the plant.
Note TS1160 Tape Drive Model 60S must be separately ordered and FC 9677 must be specified on that drive
Prerequisite:

Installation of the 3592 Model 60S tape drive requires a Quad Drive mounting kit to contain the drive: FC 1531, 1532, 1533, or 1534.
One FC 1406 is required per library if this is the first TS1160 60S tape drive ordered.
One FC 1412 is also required per library if this is the first TS1160 60S tape drive ordered.

9713 D25, D55, L25, L55 Both No Patch Panel Cables

This feature should be specified if you do not want the factory to ship any Fiber Channel cable FC 1536 “MMF Quad Drive-to-Patch Panel cables” or FC 1537 “SMF Quad Drive-to-Patch Panel cables”.
9726 L25, D25 Both TS1160 tape drive - Field Install Drive in 3584

This feature field installs one 3592 Model 60E or 60F or 60S Tape Drive into an installed 3584 Model D25 or L25. This feature is also required to field merge a 3592 Model 60E or 60F Tape Drive into a 3584 frame coming from the plant.
Prerequisite:

Installation of the 3592 Model 60E/60F/60S Tape Drive requires a Quad Drive mounting kit to contain the drive: FC 1531 or 1532 or 1533 or 1534
One FC 1406 is required per Tape Library if this is the first TS1160 60E/60F tape drive ordered.

9735 L25, L55 No IMC broadband Call Home

This feature originally indicated that the customer would allow broadband Call Home; however, the feature code is no longer utilized.
9948 D25, D55, L25, L55, S25, S55, TR1, TR2 Both 3 Phase Power Cord

This feature provides a 4.3 meter (14 foot) long power cord with an IEC 309 3P+N+G 32A plug, rated for 230 Vac, 24 Amps. This power cord supports 3 phase (wye) power. To be used with Enhanced PDU FC 1752 or 1952.
9949 D25, D55, L25, L55, S25, S55, TR1, TR2 Both C20-C13 Power Cord for spare outlets in the Enhanced PDU

This feature provides a 2.8 meter long C20-C13 Power Cord to be used between computer equipment and the Enhanced PDU FC 1752 or 1952 or customer-supplied PDU with C19 outlets. C13 connects to the male C14 inlet or power cord plug and the C20 mates with the C19 receptacle on the Enhanced PDU. This power cord is intended to be used on PDUs with C19 outlets.
9954 D25, D55, L25, L55, S25, S55, TR1, TR2 No NEMA L6-30 Power Cord

FC 9954 is used with PDU FCs 1751 and 1752 (in model TR1) or 1951 and 1952 (in model xx5). FC 9954 provides 1x power cord when ordered on a model TR1 and 2x power cords when ordered on a model xx5.
9955 D25, D55, L25, L55, S25, S55, TR1, TR2 No RS 3750DP power cord

FC 9955 is used with PDU FC 1751 and 1752 (in model TR1) or 1951 and 1952 (in model xx5). FC 9955 provides 1x power cord when ordered on a model TR1 and 2x power cords when ordered on a model xx5.
9956 D25, D55, L25, L55, S25, S55, TR1, TR2 No IEC 309 power cord

FC 9956 is used with PDU FC 1751 and 1752 (in model TR1) or 1951 and 1952 (in model xx5). FC 9956 provides 1x power cord when ordered on a model TR1 and 2x power cords when ordered on a model xx5.
9957 D25, D55, L25, L55, S25, S55, TR1, TR2 No PDL 4.3m power cord (Australia/NZ)

FC 9957 is used with PDU FC 1751 and 1752 (in model TR1) or 1951 and 1952 (in model xx5). FC 9957 provides 1x power cord when ordered on a model TR1 and 2x power cords when ordered on a model xx5.
9958 D25, D55, L25, L55, S25, S55, TR1, TR2 No 4.3m power cord (Korea)

FC 9958 is used with PDU FC 1751 and 1752 (in model TR1) or 1951 and 1952 (in model xx5). FC 9958 provides 1x power cord when ordered on a model TR1 and 2x power cords when ordered on a model xx5.
9959 D25, D55, L25, L55, S25, S55 No Unterminated power cord

FC 9959 is used with PDU FC 1751 (in model TR1) or 1951 (in model xx5). FC 9959 provides 1x power cord when ordered on a model TR1 and 2x power cords when ordered on a model xx5.

Limitation: Not supported with FC 1752 or 1952.
9966 D25, D55, L25, L55, S25, S55 No Unterminated power cords (China CCC cert)

FC 9966 is used with PDU FC 1751 (in model TR1) or 1951 (in model xx5). FC 9966 provides 1x power cord when ordered on a model TR1 and 2x power cords when ordered on a model xx5.

Limitation: Not supported with FC 1752 or FC 1952.
9970 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cord (international, 250 VAC 16A single phase, watertight connector, IEC-309)

FC 9970 includes model-dependent contents. For countries other than the United States and Canada, the connector is rated at 16A (plug type Hubbell HBL316P6W or equivalent) for connection to Hubbell type HBL316R6W or equivalent receptacles.

In the United States and Canada, the connector is rated at 20A (plug type Hubbell HBL320P6W) for connection to Hubbell type HBL320R6W or equivalent receptacles. This is the default power cord for all countries other than those specified for FC 9972 and FCs 9976 through 9983.
This power cord can be used for all countries except:

Japan
Korea
Philippines
Taiwan
Argentina
-->联系-->霍工-->13301272832(微信同号)
Brazil
Australia
New Zealand
China
South Africa

Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9972 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords, 250 VAC 15, non-watertight twist lock connector, Nema L6-15P mates with L6-15R

FC 9972 includes model-dependent contents. It is the default power cord for US, Canada, Japan, Korea, Philippines, and Taiwan.
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9976 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 10 Amp/250 Vac, non watertight IRAM 2073 plug (Argentina)
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9977 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 15 Amp/250 Vac with earth pin InMetro NBR 14136 plug (Brazil)
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9978 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 10 Amp/250 Vac Aust/NZS 3112/2000 plug (Australia and New Zealand)
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
-->联系-->霍工-->13301272832(微信同号)
9979 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 15 Amp/250 Vac JIS C8303, C8306 plug (Japan)
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9980 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 10 Amp/250 Vac, GB 2099.1, 1002 plug (China)
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9981 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 15 Amp/250 Vac with earth pin KS C8305, K60884-1 plug (Korea)
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9982 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 10 Amp/250 Vac CNS 10917-3 plug (Taiwan)
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9983 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 10 Amp/250 Vac SANS 164-1 plug (South Africa)
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9984 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 15 Amp/250V single phase power cord assemblies, NEMA L6-20P non-watertight twistlock 20A plug

FC 9984 is 2x power cords which are UL / CSA certified for use in US and Canada. These power cords mate with customer-supplied NEMA L6-20R receptacles.
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9985 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 15 Amp/250V single phase power cord assemblies with watertight 15A Russellstoll plug

FC 9985 is 2x power cords which are UL/CSA certified for use in US and Canada. These power cords mate with customer-supplied Russellstoll 3743U2 or 9R23U2W receptacles.
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
9989 D25, D55, L25, L55, S25, S55 No Dual 4.3m power cords with 10Amp/250V with IEC 309 C14 plug

FC 9989 is for use with adjacent frame PDUs (FC 1951) or external (customer-supplied) PDUs.
Note Only 1 power cord is shipped for an S25 and S55 to be used in conjunction with FC 2737.
AGKA L25, D25 Yes 3m Mini-SAS HD/Mini-SAS HD Cable

3meters Mini-SAS HD to Mini-SAS HD cable for attachment of up to four Tape Drives in the same column.
Prerequisite:

First AGKA - FC 1531
Third ASGKA - FC 1532
Fifth AGKA - FC 1533
Seventh AGKA - FC 1534

AGK1 D25, D55, L25, L55 Yes

10 Meter OM3 Fiber Cable (LC)
Provides a 10m fiber cable to connect a drive to a switch that is external to the tape library. This cable can also be used to connect to a TS7700 back-end fiber switch that is 2 to 3 frames away.

Order the number of this feature code for each drive to be connected.
AGK2 D25, D55, L25, L55 Yes

25 Meter OM3 Fiber Cable (LC)
Provides a 25m fiber cable to connect drives to a fiber switch that is external to the tape library.

Order the number of this feature code for each drive to be connected.
AGK3 D25, D55, L25, L55 Yes

80 Meter OM3 Fiber Cable (LC)
Provides an 80m fiber cable to connect drives to a fiber switch that is external to the tape library.

Order the number of this feature code for each drive to be connected.
AGKQ D25, D55, L25, L55 Yes

3 Meter OM3 Fiber Quad Cables (LC)
Provides 2 space-efficient 3m bundles (of four cables each) to connect four drives to a fiber switch in the same or one frame away, or in a TR1 top rack.

To attach tape drives in the same frame or 1 frame away from a model x25 frame containing TS7700 BE switches, order one of this feature code for each quad-drive mounting kit to be connected.

For xx5 models, each FC AGKQ has a prerequisite of an associated FC 152x or 153x.

TS4500 tape library (PDU) Feature Code 1951/1952, (3) Using Feature code 1751/1752 with a Top Rack.

中国·北京 联系方式：
1）联系人： 　 霍经理
2）手　机：　13301272832 (微信同号)
3）QQ: 619804118
4）联系电话：（010）82666745
5）传　 　真：（010）82666745
6）E-mail: 　　bjslkc@163.com
7）公司：北京深蓝融鑫科技发展有限公司
8）地址：北京市海淀区西北旺
9）公司地址、乘车路线及公司位置地图
 

Beijing ShenLan Rongxin Technology Development Co., Ltd. All Rights Reserved.
北京深蓝融鑫科技发展有限公司 版权所有,不得转载.
京ICP备05042544号