EMC Unity 300 Rescue reason for code 0x1200

EMC Unity 300 Boot Mode: Rescue Mode 故障-->解决方法

EMC Unity 300 Storage Processor boots into Service Mode. 故障-->解决方法

======== Now executing basic state ========
* System Serial Number is: 
* System Friendly Host Name is: (none)
* Current Software version: Unable to determine full software version.
* Unisphere IP address(es): Unable to determine IP address(es)
* SSH Enabled: true
* FIPS mode: Disabled

* Boot Mode: Rescue Mode  -->解决方法

* Post Faults:    0x0000
* Backend Faults:    0x0000
* Boot Faults:    0x1200
* Rescue Reason:    0x1200    -->解决方法

* Rescue reason for code 0x1200 - There is a problem with the system software 
on this Storage Processor (APPINIT). 
To attempt to correct this problem, 
first run Data Collection, and then try the following in order: 
Check all cables, reboot each SP, and reimage each Storage Processor (SP).
 If this does not resolve the issue, contact your service provider.

EMC Unity 300 Service Mode 故障-->解决方法

EMC Unity 300 SPA Service Mode 故障-->解决方法

EMC Unity 300 SPB Service Mode 故障-->解决方法

EMC Unity 300 Insert and Bring Out an SP out of service mode 故障-->解决方法

EMC Unity 300 控制器 故障-->解决方法

EMC Unity 300 SP 亮故障灯-->解决方法

EMC Unity 300 控制器A ping不通管理IP地址 -->解决方法
EMC Unity 300 控制器B ping不通管理IP地址 -->解决方法
EMC Unity 300 管理IP地址无法ping通 -->解决方法
EMC Unity 300 管理IP地址无法打开 -->解决方法
EMC Unity 300 浏览器无法打开 -->解决方法
EMC Unity 300 http IP地址无法打开 -->解决方法
EMC Unity 300 https IP地址无法打开 -->解决方法
EMC Unity 300 Unisphere https IP地址无法打开 -->解决方法
Unisphere 无法打开 -->解决方法

EMC Unity 300  控制器 SP 失败（EMC Unity 300  Controller failure);
EMC Unity 300  控制器 SPA 失败（EMC Unity 300  Controller failure);
EMC Unity 300  控制器 SPB 失败（EMC Unity 300  Controller failure);
EMC Unity 300  I/O Module 失败（EMC Unity 300  Controller failure);
EMC Unity 300  电源（ PS) 失败（EMC Unity 300  电源 failure);
EMC Unity 300  电池（ Battery) 失败（EMC Unity 300  Battery failure);
EMC Unity 300  hotSpar盘（ Spare Disk） 失败（EMC Unity 300  Spare 磁盘failure);
EMC Unity 300  磁盘（ HDD) 失败（EMC Unity 300  磁盘 failure);
EMC Unity 300  PCI-Express 交换卡（ ESW） 失败（EMC Unity 300   failure);
EMC Unity 300  内存条（ CM) 失败（EMC Unity 300  failure);
EMC Unity 300  后端卡 (DKA) 失败（EMC Unity 300  failure);
EMC Unity 300  前端卡 (CHA) 失败（EMC Unity 300  failure);
EMC Unity 300  磁盘 失败（EMC Unity 300  Disk failure);
EMC Unity 300  电池 失败（EMC Unity 300  Battery failure); 
EMC Unity 300  存储池脱机;
EMC Unity 300  全盘亮黄灯；
EMC Unity 300  更换电池方法；
EMC Unity 300  跟换扩展柜方法；
EMC Unity 300  跟换交换机方法；
EMC Unity 300  更换硬盘方法；

EMC Unity 300 -->解决方法

EMC Unity 300 Service Mode 服务模式（EMC Unity 300 BOOT Mode: Rescue Mode)-->解决方法

DELL EMC Unity 300 -->解决方法

dell EMC VNXe SP stuck in Service Mode -->解决方法

dell EMC VNXe SPA stuck in Service Mode -->解决方法

dell EMC VNXe SPB stuck in Service Mode -->解决方法

dell EMC Unity 300 SP stuck in Service Mode -->解决方法

dell EMC Unity 300 SPA stuck in Service Mode -->解决方法

dell EMC Unity 300 SPB stuck in Service Mode -->解决方法

dell EMC Unity 300 service mode-->解决方法

Dell EMC Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F,-->解决方法
Dell EMC Unity XT 380, Dell EMC Unity XT 380F, -->解决方法
Dell EMC Unity 300,Dell EMC Unity 300F, Dell EMC Unity 450F, -->解决方法
Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500 -->解决方法